We build what we install.
Most fence companies in Los Angeles buy panels and hang them. We start with steel tube and hardwood, and the gate that arrives at your driveway was square on our bench first. That difference shows up in year eight.
22 years
Same owner, same crew, since 2004
CSLB 952680
Licensed, bonded and insured
UL 325
Tested to ASTM F2200 at handover
Permits
LADBS & HOA review handled
Twenty-two years, in order
- 2004
The shop opens in Tarzana
Founded on Ventura Boulevard as a fabrication shop first and a fencing contractor second — the order that still decides how we work.
- 2009
Automation becomes half the work
Gate operators, safety sensors and access control grow from an add-on into a discipline of its own. Every automatic gate leaves tested to UL 325.
- 2015
Hardwood takes over
Ipe, mahogany and redwood displace stock panels as the default for west-side work. Every hardwood leaf gets a welded steel chassis underneath.
- 2020
Coastal specification splits out
Hot-dip galvanised substrate becomes standard on anything within a couple of miles of the water, and stays off the quote everywhere else.
- 2026
Twenty-two years, same bench
Same owner, same crew, same building. Everything we install anywhere in the county is still cut, welded and coated here first.
How we work
-
The metalwork is not subbed out
Gates are cut, welded, ground and coated in our own shop. That is why we can make a replacement part instead of ordering one and waiting three weeks for it.
-
The quote states the specification
Gauge, species, finish, operator model, clear opening. When two quotes differ by thousands it is usually because one of them is not saying what it is actually building.
-
No quote from photographs
We measure the opening, the slope, the swing path and the utility lines on site. A number given over the phone before any of that is a number that changes later.
On the record
- Licence
- CSLB 952680
- Status
- Licensed, bonded & insured
- Founded
- 2004, Tarzana
- Standards
- UL 325 · ASTM F2200
- Permits
- LADBS & HOA submittal handled
- Hours
- Mon–Sat 7:00–18:00
Find the shop
Ventura Boulevard, Tarzana. Most of what we build ends up within a thirty-minute run of it — which is what makes a same-week service call realistic.
18375 Ventura Blvd, #453 Tarzana, CA 91356 818-720-3316 Mon–Sat 7:00–18:00
Get a real number
Tell us the length and layout for your fence, or the opening width for your gate, and we’ll tell you what it takes. Site visits are free inside the service area and take about forty minutes.
- Shop
- 18375 Ventura Blvd, #453, Tarzana, CA 91356
- Hours
- Mon–Sat 7:00–18:00
- Licence
- CSLB 952680