Fences & gates in Beverly Hills
Front-boundary work where the city is specific about height and setback, and the finish has to match a house that was designed, not built to a plan book.
22 years
Same owner, same crew, since 2004
CSLB 952680
Licensed, bonded and insured
UL 325
Tested to ASTM F2200 at handover
Permits
LADBS & HOA review handled
Working in Beverly Hills
Beverly Hills enforces its front-yard rules more tightly than most of the county, so height, setback and how solid a street-facing fence may be all get checked before anything is fabricated. We resolve that at drawing stage rather than discovering it at inspection.
The finish standard is high. This is where integrated details earn their cost — lit address numerals, concealed hinges, a video intercom that sits flush instead of bolted on as an afterthought.
Plan check and design review, done in parallel
Beverly Hills plan check confirms height, setback and material against the municipal code, and the city’s architectural review process is separate again where a property sits in one of the design-review overlays. We submit for both from the same drawing set rather than sequencing one after the other, which is usually where a project’s timeline gets stretched unnecessarily.
Nothing gets fabricated ahead of that sign-off. A drawing that has not cleared review yet is not a commitment to build, and adjusting a set of drawings costs far less than reworking a finished gate.
Working on an occupied, high-value property
Most Beverly Hills jobs happen on a property that is fully lived in, often with staff on site and security already in place. We coordinate access and work windows around the household rather than the other way round, and fabrication happening off site in Tarzana means what arrives at the property is a finished section, not a shop’s worth of tools staged in the driveway.
Discretion matters here as much as the finish does. We do not photograph a property for our own portfolio without asking first, and plenty of the best work we have done in this area never appears anywhere public.
Why the integrated details cost what they do
Through-bolting a set of illuminated house numerals into a steel gate rather than gluing them on takes real fabrication time — drilling, backing plates, sealed wiring — and it is the reason the numerals are still straight and lit five summers later instead of peeling off a west-facing panel after one. Recessed intercoms follow the same logic: cut into the pilaster properly rather than surface-mounted as an obvious afterthought.
None of it is decorative for its own sake. Every integrated detail on a Beverly Hills gate is solving a specific failure mode we have seen on a cheaper version of the same idea.
Typical scope
Front-yard entrances predominate here — height-compliant iron or steel between rendered pilasters, usually with an integrated intercom and address numerals, occasionally paired with a matching pedestrian gate on the side of the property. Rear and side fencing is less common as a standalone job, usually only where a pool code barrier is required.
Timeline runs the standard six to ten weeks, with plan check and any HOA sign-off typically the longest single stage rather than fabrication or the install itself.
What we build in Beverly Hills
Fence Installation in Beverly HillsWood · Iron · Vinyl · Mesh
Wood Fencing in Beverly HillsIpe · Redwood · Cedar
Pool Barriers in Beverly HillsCode-Compliant, Self-Latching
Gate Installation in Beverly HillsSlide · Swing · Cantilever
Gate Repair in Beverly HillsSagging Leaves · Seized Tracks
Electric Openers in Beverly HillsKeypad · Intercom · UL 325
What Beverly Hills changes
- Height
- Front-yard height limits are enforced. The drawing shows the compliant height before fabrication, so nothing gets built twice.
- Finish
- Powder coat colour matched to existing joinery or window frames. Cut edges and welds primed properly so the coating does not lift at the corners.
- Integration
- Numerals through-bolted, never adhered — adhesive lets go inside one summer on a west elevation. Intercoms recessed into the pilaster.
Work in Beverly Hills
- Lit Numerals
- Illuminated Numbers
- Steel & Glass
Nearby areas
One shop in Tarzana. Most jobs sit inside a thirty-minute run of it.
Get a real number
Tell us the length and layout for your fence, or the opening width for your gate, and we’ll tell you what it takes. Site visits are free inside the service area and take about forty minutes.
- Shop
- 18375 Ventura Blvd, #453, Tarzana, CA 91356
- Hours
- Mon–Sat 7:00–18:00
- Licence
- CSLB 952680