Fences & gates in West Hollywood
Dense streets and small frontages, where the pedestrian gate does more work than the driveway one.
22 years
Same owner, same crew, since 2004
CSLB 952680
Licensed, bonded and insured
UL 325
Tested to ASTM F2200 at handover
Permits
LADBS & HOA review handled
Working in West Hollywood
Lots here are tight, so a swinging driveway gate often has nowhere to go and the pedestrian entry carries the security load instead. That shifts the spend from motors to hardware: a properly welded strike, a decent lock, and access control that works for a building with several occupants.
Street presence matters on a narrow frontage where the fence is only a few feet from the sidewalk. Detail is visible at arm’s length, so joints and finish get more attention than they would on a long suburban run.
Small-lot solutions: slide, bi-fold, or pedestrian-first
A swinging driveway gate on a tight West Hollywood frontage often has nowhere to swing into without blocking the sidewalk or fouling a parked car, which rules it out before cost even enters the conversation. Slide and bi-fold gates solve the space problem, and on the tightest lots the practical answer is a strong pedestrian gate with the driveway left open or gated separately with a lighter, simpler leaf.
We measure the actual swing arc and the sidewalk clearance on site rather than assuming a driveway gate is automatically the right approach just because the property has a driveway.
Multi-unit access, done properly
A building with several occupants needs more than one code shared by everyone — per-unit keypad codes, or mobile credentials with an access log, let a code be revoked for a single tenant without resetting it for the whole building. That is a meaningfully different specification from a single-family keypad, and it gets designed in from the start rather than retrofitted once the first tenant turnover happens.
Where a building already has a call-box or intercom system, we integrate the gate control into it rather than adding a second, separate system for residents to learn.
Detail work at close range
A fence or gate only a few feet from a busy sidewalk gets seen and touched at a distance nothing on a long suburban driveway ever does, which means welds, seams and hardware finish get more attention here than the same components would on a run set back fifty feet from the street.
It is also why a welded strike rather than a screwed one matters more in West Hollywood than almost anywhere else we work — a screwed strike within arm’s reach of a public sidewalk is an invitation rather than a theoretical risk.
Typical project types
Pedestrian entry gates with keypad or intercom access make up most of the work here, alongside fence repair on tight side-yard runs where a previous fence has simply worn out. New driveway gate installations are less common than in the valley, mainly because fewer properties have a driveway wide enough to justify one.
Where a driveway gate is installed, it is almost always a slide or bi-fold rather than a swing, for the space reasons already covered.
What we build in West Hollywood
Fence Installation in West HollywoodWood · Iron · Vinyl · Mesh
Wood Fencing in West HollywoodIpe · Redwood · Cedar
Pool Barriers in West HollywoodCode-Compliant, Self-Latching
Gate Installation in West HollywoodSlide · Swing · Cantilever
Gate Repair in West HollywoodSagging Leaves · Seized Tracks- Electric Openers in West HollywoodKeypad · Intercom · UL 325
What West Hollywood changes
- Space
- Tight frontages rule out most swing gates. Slide, bi-fold or a pedestrian-first layout usually solves it.
- Security
- Latch and strike welded to the frame, never screwed to the stile — a screwed strike levers off in seconds on a street-facing gate.
- Multi-unit
- Keypads with per-occupant codes, or mobile credentials with an access log where several people need entry.
Work in West Hollywood
- Keypad Entry
- Smart Lock, Mail Slot
-
Double Leaf
Nearby areas
One shop in Tarzana. Most jobs sit inside a thirty-minute run of it.
Get a real number
Tell us the length and layout for your fence, or the opening width for your gate, and we’ll tell you what it takes. Site visits are free inside the service area and take about forty minutes.
- Shop
- 18375 Ventura Blvd, #453, Tarzana, CA 91356
- Hours
- Mon–Sat 7:00–18:00
- Licence
- CSLB 952680