Fences & gates in Bel Air
Estate entrances on narrow canyon roads, where the gate is the first thing anyone sees and the design review committee sees it too.
22 years
Same owner, same crew, since 2004
CSLB 952680
Licensed, bonded and insured
UL 325
Tested to ASTM F2200 at handover
Permits
LADBS & HOA review handled
Working in Bel Air
Bel Air work is almost always an estate entrance: a wide opening on a road with no shoulder, a gate that has to hold the property line and read as architecture from the street. Iron between rendered pilasters is the dominant language here, and getting the anchor right into those pilasters matters more than anything else on the job.
The roads are the practical constraint. Deliveries and equipment have to fit up a canyon lane, which is why we fabricate off site and bring finished sections in rather than running a shop out of your driveway for three weeks.
The material palette Bel Air expects
Iron and stucco is the dominant language on these streets for a reason: it reads as permanent and matches the pilaster-and-render construction most of the estates already have. Powder-coated black or bronze iron between rendered columns is what most design review committees expect to see, and departing from it is a harder approval to win even when the alternative material would perform just as well.
Where a client wants something more contemporary — blackened steel, a flush glass panel — we will build it, but we flag the design-review risk up front rather than after drawings are already submitted.
Security beyond the gate itself
An estate gate is rarely the only layer. Video intercom, mobile credentials with a visitor log, and coordination with an existing camera or alarm system all get built into the gate spec rather than treated as separate work, because the access point is where most of a property’s actual security decisions get made.
We wire for that integration during fabrication — conduit runs and mounting points designed in from the start — rather than retrofitting a security contractor’s equipment onto a finished gate afterward.
Working around a lived-in estate
Most Bel Air jobs happen while the property is fully occupied, which changes the sequencing more than the design. Fabrication happens entirely off site in Tarzana, and what arrives at the property is a finished section ready to set, rather than a shop’s worth of tools and material staged in the driveway for weeks.
Site time is measured in days for that reason. The narrow canyon roads reinforce the same approach — there is often nowhere to stage material even if we wanted to.
Typical scope, start to finish
A Bel Air estate gate typically runs the full six to ten week timeline from site visit to handover, and the HOA submission is usually the single longest step in it rather than fabrication or install. We start that submission early and in parallel with drawings, rather than waiting for design sign-off before starting to draft.
The finished install itself — setting posts, hanging the leaf, commissioning the operator — is usually the fastest few days of the whole job.
What we build in Bel Air
Fence Installation in Bel AirWood · Iron · Vinyl · Mesh
Wood Fencing in Bel AirIpe · Redwood · Cedar
Pool Barriers in Bel AirCode-Compliant, Self-Latching
Gate Installation in Bel AirSlide · Swing · Cantilever- Gate Repair in Bel AirSagging Leaves · Seized Tracks
Electric Openers in Bel AirKeypad · Intercom · UL 325
What Bel Air changes
- HOA review
- Most of Bel Air runs design review. We prepare the elevation and material board for submission, which is usually the longest single step in the schedule.
- Grade
- Canyon lots slope hard. Panels step with the grade and rails stay level — raking to follow the hill reads wrong from a road that sees the fence side-on.
- Access
- Narrow lanes with no parking. Sections are fabricated in Tarzana and craned or carried in, keeping the site window to days rather than weeks.
Work in Bel Air
- Arched Iron
- Iron in Stucco
-
Ipe Slide Gate
Nearby areas
One shop in Tarzana. Most jobs sit inside a thirty-minute run of it.
Get a real number
Tell us the length and layout for your fence, or the opening width for your gate, and we’ll tell you what it takes. Site visits are free inside the service area and take about forty minutes.
- Shop
- 18375 Ventura Blvd, #453, Tarzana, CA 91356
- Hours
- Mon–Sat 7:00–18:00
- Licence
- CSLB 952680